FxPro trading conditions depend on account type pricing (spread-only vs raw spread plus commission), leverage and margin rules, execution approach, and risk controls like stop-out and negative balance protection.
Summary of FXPro's trading conditions – Account Types, Spread, Leverage and more Table of Contents
- How FxPro structures account types
- Standard account trading conditions
- Raw pricing accounts: Raw Spread and Raw+
- cTrader account trading conditions
- Understanding FxPro spreads: what “from” really means
- Leverage and margin: what FxPro publishes
- Margin protection: stop-out level and how it works at FxPro
- Negative Balance Protection
- Execution model and what it means for Forex fills
- Commissions and instrument scope: what is charged and where
- Swaps and holding costs
- Trade sizing and micro lots
- Putting it together: choosing an account type by trading style
- The most important conditions to remember for Forex risk control
- FxPro Account Opening Steps and Requirements
- What you are opening at FxPro
- Requirement checklist before you start
- Step one: Register your FxPro Direct profile
- Step two: Enter required personal details
- Step three: Complete the onboarding questions
- Step four: Create your trading account inside FxPro Direct
- Step five: Verify your profile when required
- How to upload your documents correctly
- Demo access versus live trading requirements
- Funding and trading access: what unlocks full functionality
- Jurisdiction and eligibility requirements
- A clear step-by-step roadmap you can follow
- Common issues that slow down account opening
- What “requirements” really mean for FxPro account opening
FxPro’s trading conditions center on account type, pricing structure, leverage and margin limits, and execution and risk controls that affect real trading costs and behavior in volatility. The Standard account uses a spread-only model with no separate commission line item, while Raw Spread/Raw+ splits costs into tight spreads plus stated per-lot commission on FX and metals. The cTrader account applies a volume-based commission for FX and spot metals and states that other instruments on commission-based accounts can be floating spread with zero commission. Leverage caps by instrument group determine required margin, and the margin level percentage is expressed as equity divided by used margin times 100, with stop-out stated at 50% and Smart Stop Out referenced for cTrader. The account opening process runs through FxPro Direct: register, complete personal details and onboarding questions, create a trading account, and upload KYC documents (proof of identity and, when requested, proof of residence) to unlock full live functionality.
| Account type structure | Pricing and platform access are organized by account type (Standard, Raw Spread/Raw+, cTrader), which changes how trading costs are charged. |
|---|---|
| Standard pricing model | Spread-only pricing with no separate commission line item; costs are mainly embedded in the bid/ask spread. |
| Raw Spread / Raw+ model | Raw spreads (including from 0 on certain instruments at certain times) plus stated commission rules for FX and metals (per-lot on entry and exit in the provided text). |
| cTrader commission model | For FX and spot metals, commission is stated per $1 million traded on open and close; other instruments are described as floating spread with zero commission on that account. |
| Leverage and margin limits | Leverage is published by instrument category (examples shown: Forex and precious metals up to 1:250; indices and energy up to 1:100), directly controlling margin required for position size. |
| Risk controls | Margin level is shown as Equity / Used Margin × 100; stop-out is stated as 50% for all account types, with Smart Stop Out referenced for cTrader; negative balance protection is stated as offered subject to the execution policy. |
| Account opening and KYC | Open an FxPro Direct profile, complete personal details and onboarding questions, create trading accounts inside Direct, and upload proof of identity (passport/ID/driver’s licence) plus proof of residence when requested. |
FxPro’s trading conditions are built around a few core building blocks: the account type you choose, the pricing model (spread-only or raw spread plus commission), the leverage and margin rules applied to your instruments, and the broker’s execution and risk controls that manage how orders fill and how positions are handled when margin gets tight. If you trade Forex, these details matter more than marketing because they define your real trading costs, your usable margin, and how your account behaves during volatility.
How FxPro structures account types
FxPro organizes pricing and platform access through distinct account types. The big difference between them is how you pay for each trade:
- Standard: trading cost is mainly built into the spread, with zero commission on the Standard pricing model.
- Raw pricing (Raw Spread / Raw+): spreads can start from 0, and the cost is shifted into a fixed commission on certain instruments.
- cTrader account: uses a commission per volume traded model for FX and spot metals, paired with lower spreads.
FxPro also publicly describes additional account naming for MT5, including Standard, Raw+, and Elite account types under its MT5 offering.
The practical takeaway: your “account type” is not just a label. It changes the way costs are charged and how you should measure your true Forex trading cost.
Standard account trading conditions
The Standard account is designed around an all-in spread model. FxPro describes the Standard account as having floating FX spreads from 1.2 pips via MT4/MT5, and it highlights micro lot trading availability on this type.
What “spread-only pricing” means
With spread-only pricing, you do not see a separate commission line item for many trades. Instead, your main cost is the bid/ask spread. FxPro’s trading and execution information describes Standard account types as having marked-up spreads and zero commission.
Who the Standard account fits
The Standard account is typically used by Forex traders who prefer:
- simpler cost tracking (the spread is the main visible cost)
- strategies that do not require the tightest possible raw spreads
- micro-lot position sizing (useful for smaller risk-per-trade frameworks)
Raw pricing accounts: Raw Spread and Raw+
FxPro’s raw pricing structure is built for traders who want spreads with minimal markup, and who accept a commission in exchange for that pricing.
FxPro states that on the MT4/MT5 Raw Spread account, spreads on FX and metals are offered without markup, with a commission of $3.50 per lot charged when you open and when you close the position.
FxPro also presents the Raw+ account as delivering “zero spreads (for 90%+ of the trading day) + low commission (max 3.5 USD per lot per side)” on MT4/MT5.
How to understand the raw model in real trading terms
For many Forex traders, the raw model is easier to compare across brokers because the pricing is split into two parts:
- Spread: can be very low, including from 0 on certain major pairs at certain times.
- Commission: a fixed rule per volume (for Raw Spread / Raw+ on FX and metals, it is stated as $3.50 per lot when opening and $3.50 per lot when closing for the Raw Spread description in FxPro’s FAQ).
This structure is commonly preferred by active Forex traders because it makes it easier to estimate the “round-turn” cost per lot.
Who raw pricing fits
Raw pricing is typically preferred by Forex traders who:
- scalp or trade short-term moves where spread sensitivity is high
- run algorithmic systems that depend on tight execution costs
- want cleaner pricing separation between spread and commission
cTrader account trading conditions
FxPro’s cTrader pricing is stated differently from its MT4/MT5 Raw Spread commission model. FxPro states that on cTrader accounts, for FX and spot metals, the commission is $35 per $1 million USD traded when opening a position and $35 per $1 million USD traded when closing.
FxPro also states that, compared with Standard pricing, spreads on FX and metals are lower on the cTrader platform account, paired with that commission model.
One important detail about commissions
FxPro also states that for these commission-based accounts, all other instruments (outside the specified FX pairs and spot metals commission schedule) are offered with floating spread and zero commission.
That statement matters because many traders assume a “commission account” means every instrument is commission-charged. FxPro’s published commission description is more specific: the commission charge is tied to FX pairs and spot metals on cTrader, while other instruments are described as spread-only on that account type.
Understanding FxPro spreads: what “from” really means
FxPro publishes “from” spread examples across account types, including:
- Standard: FX spreads from 1.2 pips via MT4/MT5 (floating).
- Raw pricing: spreads on FX and metals can start from 0 under the Raw Spread description.
A “from” spread is the best-case minimum under normal market conditions and liquidity. In live Forex trading, spreads float with volatility, session liquidity, and news conditions. The correct way to treat published spread examples is as a baseline for comparing pricing models, not as a constant value.
Leverage and margin: what FxPro publishes
Leverage defines how much margin you must allocate for each position. FxPro publishes leverage information by instrument category. On its leverage information page, FxPro lists maximum leverage figures under increased margin requirements, including:
- Forex: 1:250
- Precious metals (spot and future): 1:250
- Indices (spot and future): 1:100
- Energy (spot and future): 1:100
These numbers are not decorative. They are direct constraints that determine your required margin for a given position size. If you place a larger position than your free margin allows at the permitted leverage, the trade cannot be opened.
How margin is calculated in practice
FxPro’s execution and margin materials describe margin level (%) as a function of your equity and used margin, shown on the platform:
| Key item | Summary |
|---|---|
| Margin level (%) | Equity / Used Margin × 100 |
In practical Forex terms:
- Higher leverage lowers the margin required per position size.
- Lower leverage increases margin requirement and reduces the maximum position size for a given balance.
Margin protection: stop-out level and how it works at FxPro
Stop-out is one of the most important risk rules in Forex trading. It defines the point at which the broker starts closing positions automatically because your margin level has dropped too far.
FxPro states that the stop-out level is 50% for all account types.
FxPro also states that for cTrader accounts, Spotware’s Smart Stop Out logic is used.
What that means for your account
When your equity falls relative to used margin, your margin level percentage drops. At the stop-out threshold, the platform begins closing positions to reduce used margin and prevent the account from going further into deficit conditions. The exact closure sequence can depend on platform logic (and on cTrader, FxPro explicitly references Smart Stop Out).
Negative Balance Protection
FxPro states that it offers Negative Balance Protection, subject to its Order Execution Policy, to ensure clients cannot lose more than their overall investment.
For Forex traders, this matters most during extreme volatility and gap conditions, where fast price movement can exceed planned stops. Negative balance protection is a broker-level safety mechanism that addresses the risk of the account going below zero.
Execution model and what it means for Forex fills
Execution is not just “speed.” It includes how prices are sourced, how orders are filled, and how the final fill price is formed when the market is moving.
FxPro describes a “No Dealing Desk” concept in its glossary as brokers that do not intervene in the execution of orders, which are usually executed automatically.
FxPro’s Order Execution Policy describes a model where prices come from multiple liquidity and data providers, using aggregation technology to quote best bid/ask prices.
VWAP execution for market orders on the FxPro platform
FxPro also describes that market orders can be executed at VWAP (Volume-Weighted Average Price), where the system aggregates volume from third-party liquidity providers and executes at the average and best available price at the time of execution.
For Forex traders, that has a clear implication: when liquidity is split across providers and levels, a larger order can fill across multiple price levels, and VWAP reflects the weighted average of those fills.
Commissions and instrument scope: what is charged and where
FxPro is explicit about where commissions apply:
- On the Raw Spread account, spreads on FX and metals start from 0 with a $3.50 per lot commission when opening and when closing.
- On cTrader accounts, when trading FX and metals, there is a commission fee of $35 per $1 million USD traded when opening and when closing.
- FxPro states that all other instruments on those account types are offered with floating spread and zero commission.
This structure is useful for Forex-focused traders because it keeps the most active instruments (major FX pairs and spot metals) on transparent pricing rules.
Swaps and holding costs
FxPro publishes information under “Commissions & Swap Charges” to help traders understand costs beyond spreads and commissions. In Forex trading, swaps are the primary holding cost component for positions held overnight, and they vary by instrument and direction (long vs short).
FxPro’s commission and swap page explains the commission framework and references swap charges as part of trade costs.
A practical way to treat swaps in your strategy is to consider them as a variable carry cost that can either reduce returns or, in some cases, offset costs depending on the instrument and direction. In day trading, swaps are often irrelevant; in swing trading, they can be material.
Trade sizing and micro lots
FxPro promotes micro lot trading availability on its Standard account presentation, which supports smaller position sizing.
Micro lot sizing is a practical feature for Forex traders who want:
- tighter risk control per trade
- strategy testing on live conditions with smaller exposure
- smoother scaling as confidence grows
Putting it together: choosing an account type by trading style
Here is how the account types map to common Forex trading styles, using FxPro’s published pricing rules:
If you prefer simple pricing
Choose the Standard model: spread-only pricing with floating spreads and no separate commission line in the Standard structure.
If you trade actively and care about tight spreads
Choose Raw Spread / Raw+ on MT4/MT5: raw spreads on FX and metals with a fixed commission rule per lot on entry and exit.
If you want cTrader’s pricing model
Choose cTrader: lower spreads on FX and metals plus a commission per traded volume ($35 per $1 million USD traded on open and close for FX and spot metals).
The most important conditions to remember for Forex risk control
If you trade Forex at FxPro, the conditions that matter most to your day-to-day risk control are these:
- Stop-out level: FxPro states 50% stop-out for all account types, with Smart Stop Out logic on cTrader.
- Leverage by category: FxPro publishes leverage caps by instrument group, including Forex at 1:250 and indices/energy at 1:100 in its leverage information listing.
- Cost structure: Standard is spread-based; Raw pricing adds commission; cTrader commissions are volume-based for FX and spot metals.
- Execution design: FxPro describes liquidity aggregation and VWAP market order execution logic on its platform specifications, supported by its execution policy framing.
- Negative balance protection: FxPro states it offers it, subject to its order execution policy.
FxPro’s trading conditions can be summarized in a clean structure: choose your pricing model (Standard or raw pricing), understand the commission rules that apply to FX and metals on your chosen account type, work within published leverage and margin limits, and manage risk using the broker’s defined margin level and stop-out framework.
For Forex traders, the most actionable difference is pricing: Standard accounts package costs into the spread, while Raw Spread / Raw+ and cTrader models shift costs into a defined commission rule that pairs with tighter spreads. Add FxPro’s published stop-out level, leverage caps by instrument group, and its described execution approach, and you have a complete picture of the conditions that shape real trading performance on the platform.
FxPro Account Opening Steps and Requirements
Opening an FxPro account is a structured online process built around one main hub: FxPro Direct. You register a Direct profile first, complete the required profile and trading-knowledge questions, create the trading account type you plan to use for Forex trading, and upload verification documents when requested. FxPro also supports registration through its mobile app, which follows the same compliance flow and uses the same Direct profile in the background.
What you are opening at FxPro
When traders say “FxPro account,” they usually mean two connected things:
- FxPro Direct profile
This is your client area profile where you manage onboarding, verification, trading accounts, and documents. - Trading account(s)
These are the accounts that connect to trading platforms (for example MT4, MT5, or cTrader) and are used to place Forex and CFD orders.
You open the Direct profile first, then you create trading accounts inside Direct.
Requirement checklist before you start
If you want a smooth setup, prepare these items before you begin:
- A working email address and a password you can store safely (used for FxPro Direct login).
- A phone number you can use for account contact details.
- Your personal details (name, country of residence, nationality, date of birth, address).
- The information required for onboarding questions (occupation, education level, financial status, investment plans, and trading experience).
- Your verification documents (identity document, and proof of residence when requested).
Having these ready prevents delays between registration and a fully functional Forex trading setup.
Step one: Register your FxPro Direct profile
Option A: Register on the website
To open a live trading account, FxPro directs users to click Register on the FxPro homepage and complete the sign-up steps. During this flow, you can be asked to upload identity documents, or you can upload them later through FxPro Direct.
In the Direct registration flow, you provide the base identity and contact fields first, then move into the rest of the profile sections. The Direct guide describes starting by opening a new FxPro Direct account via the Register button.
Option B: Register in the FxPro mobile app
FxPro also supports registration via the FxPro app. The app onboarding states that to unlock full features—creating trading accounts, trading via the integrated platform, and funding—you must complete full registration, which includes answering trading-experience questions and uploading digital copies of required documents to verify your profile.
Step two: Enter required personal details
FxPro’s onboarding flow requires core personal information that ties your profile to a real person and supports compliance review. In the Direct guide, the registration flow includes personal details such as nationality, date of birth, mobile number, and residential address, and it also explains that the broker needs information about your financial status and investment plans.
What this means in practice
You should enter:
- Your legal name (consistent with your identity document)
- Your country of residence
- Your nationality
- Your date of birth
- Your mobile number
- Your residential address (consistent with proof of residence if requested)
Accuracy matters because these fields are compared against your uploaded documents during verification.
Step three: Complete the onboarding questions
FxPro’s onboarding includes questions designed to build a client profile and determine trading access. The Direct guide explains that FxPro needs to understand your financial status, investment plans, and trading experience, and it states that your responses determine your opportunity to trade CFDs with FxPro.
The FxPro app FAQ also states that full registration involves answering a series of questions about your trading experience.
What FxPro asks for
The onboarding questions cover areas such as:
- Occupation and education level
- Financial status and investment plans
- Trading experience
These are required profile steps, not optional extras. Enter consistent, truthful answers that match your real trading background and intentions.
Step four: Create your trading account inside FxPro Direct
After you have a Direct profile, you create the trading account(s) you will use for Forex trading. The FxPro Direct guide explains that to open a new live trading account via Direct, you use the “Create new account” function in the Accounts section.
Why this step matters
This is where you decide how you will trade:
- Which platform login you will use (such as MT4, MT5, or cTrader, depending on your available options in Direct)
- Which pricing/account type you want (FxPro provides account types inside its platform ecosystem)
- How you structure accounts if you want separate accounts for different Forex strategies
Even if you start with one trading account, FxPro Direct is built to manage multiple accounts under one profile.
Step five: Verify your profile when required
Verification is the compliance stage where FxPro confirms your identity and, when requested, your residential address. FxPro’s verification FAQ states it requires a copy of a valid International Passport, National ID card, or Driver’s Licence to verify identity, and it may also request proof of residence showing name and address, issued within the last six months. It also states you can see required documents and verification status at any time via FxPro Direct.
Proof of Identity requirements
FxPro accepts these identity documents:
- International Passport
- National ID card
- Driver’s Licence
Your document must be valid and readable, with the details clearly visible.
Proof of Residence requirements
FxPro may request proof of residence, and it specifies:
- The document must show your name and address
- It must be issued within the last six months
FxPro also lists examples in its verification guidance such as a bank statement or utility bill in the app FAQ description of required documents.
How to upload your documents correctly
FxPro provides a specific upload path in FxPro Direct. The FxPro Direct FAQ explains that to upload documents, you go to My Profile → Upload Documents, click Browse, choose the document, and upload it. It also states that the Back Office Department reviews documents in the order received.
Practical rules for clean uploads
A clean upload package follows these rules:
- Full document visible (no cut edges)
- No blur or glare
- Text readable
- Correct side(s) of documents captured where applicable
If the file is hard to read, it cannot be verified properly.
Demo access versus live trading requirements
FxPro draws a clear line between demo access and live trading activation. On its demo account page, FxPro states you can complete registration and access demo accounts without uploading verification documents or funding until you are ready to trade live. It also states a real account is created upon completion, but to activate it, FxPro needs to verify identity and may need to confirm additional details.
What this means for Forex traders
- If your goal is to test platforms and practice Forex trading, demo access comes first and does not require immediate document upload or funding.
- If your goal is to trade live, treat verification and profile completion as required onboarding steps that connect directly to account functionality.
Funding and trading access: what unlocks full functionality
FxPro’s account opening FAQ states that after registration you can proceed to fund your account and start trading on its platforms. It also states you can be asked to upload ID documents during sign-up or upload them later via FxPro Direct.
The FxPro app FAQ adds an important operational rule: to unlock all app features, create trading accounts, trade on the integrated platform, and fund accounts, you must complete full registration and verify your profile by uploading the required documents.
In practical terms: if your goal is live Forex trading, you should complete the full registration flow and be ready to provide documents when requested so funding and platform access are not blocked.
Jurisdiction and eligibility requirements
FxPro states that the jurisdiction under which your FxPro account will be opened depends on your country of residence, and it states it does not offer CFDs to residents of certain jurisdictions including the USA, Iran, and Canada.
This is a core requirement: your country of residence determines eligibility and the legal framework applied to your account.
A clear step-by-step roadmap you can follow
Here is the full sequence in the order that typically avoids friction:
Create your FxPro Direct profile
- Register on the website or in the FxPro app.
- Confirm your login credentials (email + password).
Complete the profile details
- Enter personal details: nationality, date of birth, phone number, and residential address.
- Complete required onboarding questions: financial status, investment plans, trading experience.
Create your trading account
- Use FxPro Direct to create a new trading account in the Accounts section.
Upload KYC documents when requested
- Proof of identity: passport, national ID, or driver’s licence.
- Proof of residence when required: document showing name and address issued within the last six months.
- Upload via My Profile → Upload Documents in FxPro Direct.
Move to funding and live trading
- Once your profile is in the required status, you can proceed to fund and trade on FxPro platforms.
Common issues that slow down account opening
Mismatch between profile details and documents
If your name or address is entered one way in your profile and shown differently on documents, the verification check becomes harder to complete. Align your entered data with what your documents display. FxPro’s verification requirements focus on identity and address confirmation through documents shown in Direct.
Uploading documents in the wrong place
FxPro provides a defined upload path inside FxPro Direct (My Profile → Upload Documents). Submitting outside that path creates avoidable delays because the process is designed around Direct.
Skipping the experience and profile questions
FxPro explicitly requires trading experience and financial profile details during full registration. In the Direct guide, it states your answers determine your opportunity to trade CFDs with FxPro, so those fields are not optional.
What “requirements” really mean for FxPro account opening
When you break it down, FxPro’s account opening requirements fall into four categories:
- Registration credentials
- email + password for FxPro Direct.
- Personal information
- core identity and address fields.
- Onboarding profile
- financial status, investment plans, and trading experience questions.
- Verification documents
- proof of identity, plus proof of residence when requested.
If you complete all four cleanly, you move from registration to a fully operational Forex trading account setup without unnecessary back-and-forth.
FxPro account opening is not complicated, but it is strict: you register an FxPro Direct profile, complete required profile and experience sections, create your trading account, and upload the required KYC documents when requested through FxPro Direct. Demo access can be started without immediate document upload or funding, but live trading access is tied to full registration and verification steps.
Posted by FXBonus
Please check FXPro official website or contact the customer support with regard to the latest information and more accurate details.
Please click "Introduction of FXPro", if you want to know the details and the company information of FXPro.
Deriv 
AdroFX 
FXGlory 
XM 
FXPRIMUS 
