How much are the fees & commission of FXPro?

FXPro divides its trading costs into three main categories: spreads, commissions, and overnight swaps, with specific pricing models dependent on whether you choose a Standard, Raw+, or cTrader account. Standard accounts utilize a spread-only model with no separate commission, whereas Raw+ (MT4/MT5) accounts charge $3.50 per lot per side, and cTrader accounts charge $35 per $1 million USD traded. Beyond entry costs, traders must account for overnight financing (swaps) which include a triple-charge on Wednesdays for FX, as well as potential inactivity fees of $10 per month if the account remains dormant. The broker offers Negative Balance Protection and a 50% stop-out level across all platforms, ensuring risk management controls are in place regardless of the chosen fee structure. Ultimately, the choice of account dictates whether a trader pays via marked-up spreads or raw spreads plus commission, allowing users to align costs with their specific trading style.

When traders ask “How much does FXPro cost?”, they’re usually talking about three buckets of charges:

 
• Trading costs (spreads, commissions, swaps/overnight financing)

 

• Account and money-movement costs (deposit/withdrawal fees, inactivity)

 

• Hidden frictions that behave like fees (currency conversion, spread widening, slippage)

FXPro uses different pricing models depending on the platform and account type you choose. That choice matters more than most people expect, because it changes how you pay: either mainly through the spread, or through a raw spread + commission structure.

Invest in Forex with FXPro

The Two Main Pricing Models at FXPro

Spread-only pricing (no separate commission)

With spread-only pricing, FXPro does not add a separate commission line for each trade. Instead, the broker’s charge is built into the spread (the gap between bid and ask).

FXPro describes its MT4/MT5 Standard accounts as using marked-up spreads with zero commission.

This model is straightforward:

 
• You “pay” when you open the trade because you enter at the ask and can only exit at the bid.

 

• The wider the spread, the higher the cost—especially for short-term forex trading like scalping or intraday strategies.

Open an account with FXPro

Raw spread + commission pricing

The second model offers tighter spreads (often called “raw” or “no markup”) and then charges a fixed commission.

FXPro states that on the MT4/MT5 Raw Spread account, spreads on FX and metals are without markup, and there is a commission of $3.50 per lot, charged when you enter and exit a trade.

FXPro also states that on cTrader, FX and spot metals commissions are charged as $35 per $1 million USD traded.

Raw pricing is often preferred by traders who:

 
• trade frequently,

 

• need lower spread costs,

 

• want predictable commissions per trade size.

Invest in Forex with FXPro

FXPro Spreads: The Core Cost for Most Forex Traders

A spread is the most common forex trading cost. Even when a broker advertises “zero commission,” you still pay via the spread.

At FXPro, spreads depend on:

 
• platform (MT4/MT5 vs cTrader),

 

• account type (Standard vs Raw),

 

• instrument (EUR/USD vs exotics),

 

• market conditions (liquidity, volatility, session overlaps).

FXPro’s own platform comparison materials highlight that Raw pricing can start from very low spreads and then adds commission (for example, FX majors “from 0 pips + commission”).

Open an account with FXPro

Why spreads are not a fixed number

Spreads are not a single static fee you can memorize. In forex, spreads typically expand when:

 
• liquidity is thin (late session hours),

 

• high-impact news hits,

 

• markets gap at open,

 

• volatility spikes.

So the structure (spread-only vs raw+commission) is more important than chasing a single “typical spread” number.

Invest in Forex with FXPro

FXPro Commissions: Exact Numbers by Platform

Here’s what FXPro states about commission charges on its major setups.

MT4/MT5 Standard: No commission

FXPro describes its MT4/MT5 Standard accounts as zero commission with the cost included in the spread.

What that means in practice:

 
• You don’t see a separate commission line item.

 

• Your cost is mainly the spread (plus swaps if held overnight).

Open an account with FXPro

MT4/MT5 Raw Spread: $3.50 per lot per side (FX & metals)

FXPro states that the MT4/MT5 Raw Spread account uses spreads without markup on FX & metals, with a commission of $3.50 per lot, charged on entry and exit.

How to read that correctly:

 
• A standard forex lot is typically 100,000 units.

 

• “Charged when you enter and exit” means it’s effectively $7 per round trip per lot (open + close) for instruments where this pricing applies.

This is a common institutional-style fee model and is easy to calculate:

 
• 0.50 lots ≈ half the commission

 

• 2.00 lots ≈ double the commission

Invest in Forex with FXPro

cTrader: $35 per $1 million traded (FX & spot metals)

FXPro states that commission on cTrader for FX pairs & spot metals is $35 per $1 million USD traded.

FXPro also provides examples that translate this into lot-sized trading:

 
• For 1 lot (100k) of EUR/USD, the commission is charged on entry and on exit, and the total is the two sides combined.

Important detail: FXPro notes that if your account is not denominated in USD, the commission amount is converted into your account currency.

Overnight Fees at FXPro: Swaps and Financing Charges

If you hold a forex position open past the daily rollover time, you typically pay or receive swap (also called rollover or overnight financing).

FXPro explains swap as being based on:

 
• the interest rate difference between the currencies in the pair, and

 

• an additional FXPro charge for rolling the position to the next trading day.

Open an account with FXPro

Triple swap: the “weekend” adjustment

Because spot forex markets settle across business days, brokers apply a multiple swap charge on one day of the week to reflect weekend settlement.

FXPro states that swaps are charged once per weekday, and:

 
• FX & metals have a triple charge on Wednesday

 

• other instruments have a triple charge on Friday

Futures CFDs: no swaps

FXPro also states that no swaps are incurred on futures contracts.

That’s a major structural difference. Many traders prefer futures-based CFDs for longer holds because pricing is embedded differently than spot CFDs.

Invest in Forex with FXPro

Swap-Free (Islamic) Accounts: “No Swap” Does Not Mean “No Cost”

Swap-free accounts remove standard overnight swaps for religious purposes, but FXPro explicitly states that fees may apply once trades remain open past a certain number of days, depending on the instrument.

FXPro publishes a document showing grace periods (number of nights before charges apply) and rollover fees per night after that grace period for swap-free accounts across instrument groups.

Deposits and Withdrawals: Does FXPro Charge Funding Fees?

FXPro states that it does not charge any fees/commission on deposits or withdrawals.

It also notes that:

 
• fees can be charged by other payment providers (especially banks), and

 

• for some e-wallet withdrawals, a fee can apply in a specific situation related to non-trading activity.

So, the broker-side policy is “no internal fee,” but external rails (banking networks, card processors, e-wallet rules) can still create costs around the transfer.

Open an account with FXPro

Inactivity Fees: What Happens If You Don’t Trade?

FXPro applies an inactivity fee after a period with no activity, but the exact amount can differ by entity and contract.

An FXPro client agreement for one entity describes an inactivity fee of $10 (or currency equivalent) charged monthly after an inactivity period, with additional details about how it’s applied if balances are low.

Other widely used broker cost summaries describe a different schedule: a one-off maintenance fee followed by a monthly fee after six months of inactivity.

Currency Conversion Fees: The Cost Traders Often Miss

Even if a broker advertises low spreads and clear commissions, you can still pay meaningful costs through currency conversion.

FXPro’s own commission explanation for cTrader shows that commission can be:

 
• calculated in USD based on trade size, then

 

• converted into the account currency.

Any time you trade an instrument whose quote currency differs from your account currency, conversion can affect:

 
• realized PnL,

 

• commission equivalents,

 

• swap equivalents,

 

• withdrawals if you move funds across currencies.

This isn’t always shown as a single “fee line,” but it can change net performance over many trades.

Invest in Forex with FXPro

How to Estimate Your All-In Cost Per Forex Trade on FXPro

To estimate your real cost, you combine:

Spread cost

 
• Measured in pips (or points)

 

• Converted into money based on your lot size and pip value

Open an account with FXPro

Commission cost (if applicable)

 
• MT4/MT5 Raw Spread: $3.50 per lot per side for FX & metals

 

• cTrader: $35 per $1 million traded on FX & spot metals

 

• MT4/MT5 Standard: no commission

Overnight financing (if held past rollover)

 
• Swap can be positive or negative

 

• Triple swap applies on specific days

A clean way to think about it:

 
• Day trader → spread + commission (if any)

 

• Swing trader → spread + commission (if any) + swaps (big factor)

 

• Longer holds → instrument type matters (spot CFDs vs futures CFDs)

Invest in Forex with FXPro

Which FXPro Fee Structure Fits Which Forex Trading Style?

If you trade frequently (scalping/intraday)

Many high-frequency forex traders prefer raw spread + commission, because spreads often matter more than anything else. FXPro offers raw pricing on MT4/MT5 with a defined per-lot commission, and cTrader with a defined per-million commission.

Open an account with FXPro

If you trade less often and want simplicity

Spread-only accounts keep the fee structure simpler because there’s no commission line. FXPro describes its MT4/MT5 Standard accounts as zero commission with the cost in the spread.

If you hold trades overnight regularly

Swaps become a major variable. FXPro’s swap rules (including triple swap timing) are essential for cost control on longer holds.

FXPro fees and commissions are not a mystery once you separate them into the parts that matter:

 
• Spreads are always part of the cost, whether you see a commission or not.

 

• Commissions apply mainly on MT4/MT5 Raw Spread and cTrader for FX & metals, with clearly stated formulas.

 

• Swaps apply when you hold positions overnight, with triple swap rules depending on instrument category.

 

• Deposits/withdrawals are listed as no broker-side fee, though transfer rails can still add costs in certain cases.

 

• Inactivity fees exist and can vary by FXPro entity and agreement wording.

Invest in Forex with FXPro

FXPro Account Types and Trading Conditions Explained for Forex Traders

FXPro is built around a simple idea: you choose a trading platform, and the account’s pricing and position rules follow that platform’s structure. For forex trading, the most important differences between FXPro account types come down to spread style, commission, and a few practical details like hedging vs netting, order execution, and minimum trade size. If you understand those moving parts, you can pick an account type that matches your strategy instead of paying avoidable costs.

The Core FXPro Account Choices

FXPro groups accounts around four main setups:

 
• Standard account (MT4/MT5)

 

• Raw+ account (MT4/MT5)

 

• Elite account (MT4/MT5, tied to rebates and higher-tier pricing benefits)

 

• cTrader account (cTrader platform pricing model)

FXPro also supports demo accounts and swap-free accounts, and it offers a separate Professional Client classification that changes leverage limits and regulatory protections.

Open an account with FXPro

Standard Account: Spread-Only Pricing for Straightforward Forex Trading

The Standard account is the simplest structure FXPro offers on MetaTrader. In this setup:

 
• FXPro uses marked-up floating spreads on MT4/MT5

 

• There is no separate commission added to the trade ticket for typical forex pricing on this account type

That means your primary trading cost on forex is the spread—the difference between bid and ask—paid implicitly when you open a position. This is often preferred by traders who want a clean “one cost” model and do not want to track commission per lot.

What “floating spread” actually means in practice

Floating spreads move with market liquidity and volatility. In active sessions, spreads can be tighter; during thin liquidity or fast moves, spreads can widen. FXPro explicitly notes that spreads can vary beyond typical averages during abnormal market conditions.

Invest in Forex with FXPro

Raw+ Account: Lower Spread Structure Plus a Clear Forex Commission

The Raw+ account on MT4/MT5 is designed for traders who care about spread sensitivity—especially scalpers and active intraday traders. FXPro describes this model as:

 
• Spreads on FX and metals without markup, starting from very low levels

 

• A commission of $3.50 per lot charged when you open and when you close the position (so commission is applied per side)

This structure shifts part of the cost from the spread into a predictable commission. For many forex strategies, that makes trade costs easier to model because the commission scales cleanly with position size.

What Raw+ changes for trade planning

With Raw+ you typically see:

 
• a tighter spread environment on major FX pairs compared with spread-only pricing, and

 

• a commission line that becomes a significant part of total cost, especially on small-stop strategies.

FXPro also states that all other instruments on these account types are with floating spread and zero commission, meaning the commission model is focused on FX pairs and spot metals rather than everything on the platform.

Open an account with FXPro

Elite Account: A Rebate-Oriented Tier Built on Raw-Style Pricing

The Elite account is positioned as a higher-tier MetaTrader option that keeps the raw-style structure (raw spreads and a commission model) while adding rebates based on trading activity. FXPro’s own materials describe Elite as offering raw spreads and a rebate framework connected to volume-based benefits.

This type is usually aimed at traders who:

 
• trade large volume regularly,

 

• want to reduce effective costs via rebates, and

 

• prefer MetaTrader execution and tooling.

Elite is not “better” for everyone. If you are low-volume, rebates may not materially change your effective cost. But if you trade frequently, rebates can meaningfully reduce the net impact of commissions over time.

Invest in Forex with FXPro

cTrader Account: A Different Commission Formula and Platform Style

FXPro’s cTrader account is built around the cTrader platform ecosystem and uses a commission formula that differs from the MetaTrader Raw+ approach.

FXPro states that for cTrader:

 
• Commission on FX pairs and spot metals is $35 per $1 million USD traded

 

• This commission is charged upon opening and closing a position

 

• If your account currency is not USD, the commission is converted into your account currency using exchange rates

FXPro also states that indices and energies on the cTrader account are available with marked-up spreads and zero commission, keeping the commission focus on FX and spot metals.

Why the cTrader pricing model matters

If you trade in standard forex lot sizing, cTrader commissions scale with notional traded. FXPro even provides a calculator explanation showing the exact commission math per side based on trade size and conversion into account currency.

This structure is attractive when you want:

 
• a platform designed around fast order handling and advanced order controls,

 

• depth-of-market features common in cTrader setups, and

 

• a commission model that is consistent across FX and spot metals.

Open an account with FXPro

Trading Instruments: Forex First, Multi-Asset Access Alongside It

For traders focused on forex SEO terms, it still helps to understand the broader instrument list because it affects platform and account availability. FXPro lists access to a large catalog of CFD instruments including Forex, Metals, Indices, Energy, Shares, ETFs, Futures, and Cryptocurrencies, with availability depending on platform and offering structure.

Even if you only trade EUR/USD and GBP/USD, multi-asset access matters because:

 
• margin usage can change if you diversify positions,

 

• your platform choice may determine which instruments you can trade under one login, and

 

• account cost rules can differ by asset class (commission on FX/metals vs spread-only on other CFDs).

Invest in Forex with FXPro

Execution Model: Market Execution, Pricing Logic, and Requotes

Execution rules shape real trading outcomes—especially for forex scalping and news trading.

Market execution and VWAP routing

FXPro explains that its market orders are executed using a VWAP approach (Volume Weighted Average Price) and states that, under market execution, there are no requotes because the order is filled at the best available price level(s).

MT4 “instant order” requotes can exist in specific conditions

FXPro also documents that instant orders on MT4 can be re-quoted if the requested price is not available, with the trader needing to accept the new quote. This is specific to the MT4 “instant order” mechanism as described in FXPro’s MT4 execution documentation.

For many traders, the practical takeaway is that platform choice (and the order type you use) affects whether the “price confirmation” step can appear during volatility.

Open an account with FXPro

Spreads and Commissions: How Trading Costs Differ by Account

FXPro’s cost structure can be summarized clearly:

 
• Standard (MT4/MT5): marked-up floating spreads, zero commission on the common forex pricing model

 

• Raw+ (MT4/MT5): spreads without markup on FX & metals, plus a commission of $3.50 per lot per side

 

• Elite (MT4/MT5): raw-style pricing plus rebate framework tied to activity

 

• cTrader: $35 per $1 million commission on FX & spot metals (charged on open and close), with other asset classes mainly spread-based

This is the foundation for picking an account type:

 
• If you trade less often and want simplicity, spread-only is easy to track.

 

• If you trade frequently and spreads dominate your edge, raw + commission is often easier to optimize.

Invest in Forex with FXPro

Leverage and Margin: What FXPro Makes Clear

FXPro highlights that retail leverage can be capped at 1:30 under typical retail rules, and it also describes that traders who qualify as Professional Clients can access higher leverage conditions.

FXPro also emphasizes a key point many traders overlook: higher leverage increases how large spread and swap costs feel relative to the margin you post, because you control larger notional exposure with less deposited margin.

Margin level and forced liquidation rules

FXPro states that the stop out level is 50% for account types, and it defines margin level as:

Margin level (%) = Equity / Margin × 100

When margin level reaches the stop out threshold, positions begin to close automatically to prevent further deterioration. On cTrader, FXPro notes that Spotware’s “Smart Stop Out” logic is used.

This matters for forex traders because:

 
• margin is consumed by open positions,

 

• equity changes with floating PnL,

 

• and a fast move can trigger partial or full forced closure depending on platform logic.

Open an account with FXPro

Negative Balance Protection: A Key Risk Control

FXPro states it offers Negative Balance Protection, designed to ensure that losses do not exceed the account balance, under the broker’s execution policy framework. FXPro’s order execution policy also describes restoring an account back to zero if it shows a negative figure due to extreme conditions such as market gaps.

For forex traders, this is especially relevant during:

 
• major gaps at market open,

 

• sharp moves during low liquidity,

 

• sudden event-driven spikes.

It does not remove trading risk, but it changes the worst-case tail behavior compared to brokers that allow debit balances.

Invest in Forex with FXPro

Hedging, Netting, and Position Handling

How your platform handles multiple positions in the same pair can change strategy execution.

Hedging

FXPro states it allows hedging (locking) on its account types, and it explains that taking an opposite position on the same currency pair does not require additional margin in that locked scenario (while hedging via correlated pairs does require margin).

Netting on MT5 by default, with a hedging option available in certain setups

FXPro documents the MT5 netting behavior: multiple trades in the same instrument combine into a single net position, and placing an equal opposite trade can close the existing position rather than create a separate hedge leg.

FXPro has also announced MT5 account settings that include a choice between Netting and Hedging for certain jurisdictions, describing how netting combines positions while hedging allows multiple positions, including opposing directions.

For forex traders this is practical, not theoretical:

 
• If you run grid systems or lock-based risk controls, you typically want hedging.

 

• If you prefer clean portfolio-style exposure where you only hold a net position, netting can be simpler.

Open an account with FXPro

Trade Size, Stop Levels, and Order Constraints

FXPro’s platform comparison notes that trade size can start from 0.01 lots (micro lots) on supported setups, which matters if you want fine control of position sizing in forex.

It also outlines differences in stop/limit constraints, including that cTrader can have no minimum stop/limit level in the comparison table context, while other platforms can apply minimum distances depending on instrument specifications.

This is a real trading-condition detail: minimum stop distance affects whether you can place tight protective stops or pending orders close to market price.

Swaps, Rollovers, and Swap-Free Accounts

If you hold forex positions beyond the daily rollover point, financing adjustments apply. FXPro describes swap/rollover charges as reflecting the cost of funding trades kept open overnight.

FXPro also offers swap-free accounts designed to remove standard overnight swaps for certain clients, but swap-free structures can apply other charges depending on instrument and holding duration rules. (The key point is that “swap-free” changes the overnight cost mechanism rather than guaranteeing cost-free long holds.)

Invest in Forex with FXPro

Matching an FXPro Account Type to a Forex Trading Style

Here’s a practical way to choose, based on trading behavior rather than marketing labels.

If you focus on short-term forex trading

Short-term strategies are sensitive to spreads and execution. Raw+ or cTrader pricing can be attractive because they separate spread and commission clearly for FX.

Open an account with FXPro

If you want simple cost tracking

Standard (spread-only) pricing keeps the cost model easy: your primary trading cost is embedded in the spread.

If you trade high volume and want rebates

Elite is designed around raw pricing with activity-linked benefits. This is most relevant if your monthly trading volume is substantial.

If you need platform features that change workflow

 
• MT4 is often used for legacy EA workflows and broad indicator ecosystems.

 

• MT5 adds modern platform functions and different position handling rules.

 

• cTrader is built around its own interface, depth-of-market tooling, and specific order controls.

FXPro’s account types are easiest to understand when you focus on what changes your daily trading:

 
• Standard is spread-only and straightforward on MT4/MT5.

 

• Raw+ uses low-markup spreads on FX/metals plus a clear per-lot commission on MT4/MT5.

 

• Elite builds on raw-style pricing with rebates aimed at active traders.

 

• cTrader uses a per-notional commission model on FX/metals and keeps other asset classes mostly spread-based.

Across account types, FXPro describes key risk controls that matter for forex trading:

 
• a stop out level of 50% and platform-specific stop out logic for cTrader,

 

• Negative Balance Protection under its execution policy framework,

 

• and platform rules for netting vs hedging that can change how strategies behave in real time.

If you choose your account type based on how you trade—spread sensitivity, commission tolerance, position handling, and execution preferences—you can align FXPro’s setup with your forex strategy and keep your trading conditions predictable.

Posted by FXBonus

• FXBonus's Latest Articles